Blenheim Electric Inset Fire Manual
Frequently Asked Questions. How long will my fire’s LED bulbs last?
Blenheim Electric Fire Manual
The LED bulbs will last up to 50,000 hours - pretty much the whole lifetime of your fire. Are the plugs easily accessible if plugged in behind the fire? Fires must not be plugged in anywhere behind the surround or the fire. The plug must remain accessible after installation to allow the fire to be isolated in an emergency. How long is the fire’s power lead and what colour is it? All of our inset fires are fitted with a power cord which has a nominal length of 1.7m.
They are black. What size are the screws that are used to fix the fire into the surround and where can I buy them?
Electric Inset Fire Basket
The screws we use are ½ inch No.6 pan heads, and should be available at any good DIY store. Can I replace the LED bulb in my Adam Electric Fire? The LED bulbs are currently an unservicable part and cannot be replaced. Is the brass real? No - the product uses a brass effect.
Electric Inset Fire
Clara LED Inset Electric Fire. LED Technology - low energy flame effect. Powerful 2.0kW heat output. Remote control. Flame-effect only setting - without heat. OVERVIEW: Great entry level electric fire with LED flame picture The Clara LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance.
Clara LED Inset Electric Fire. Manual - Button & Remote Control. Write a review about the Clara Blenheim Black LED Electric Fire by completing the form below. BLENHEIM LED INSET ELECTRIC FIRE All instructions must be handed to the user for safekeeping. Please note: Except where otherwise stated, all rights. Focal Point Blenheim Brass Remote Control Inset Gas Fire - B&Q for all your home and garden supplies and advice on all the latest DIY trends.
LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The inset electric fire features a 2.0kW heat output, flame effect only setting – no heat, thermostatic control, timer control, full remote control or buttons on the front of the fire below the canopy.
A helpful LED display is located in the top left hand corner of the window which displays, flame brightness, timer, thermostatic control and a moulded plastic coal effect fuel bed. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The Clara fits a standard fireplace opening, typically 16' wide x 22' high (please refer to specification). For added convenience two spacer frames are provided (supplied fitted) to allow the Clara to be taken out of the box, placed flush against a flat wall and plugged in for instant heat - no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers - requires a 114mm fireplace depth), semi-inset (1 spacer fitted - requires a 54mm fireplace depth) or flush-fit (2 spacers - 0mm fireplace depth).
The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium).
The ashpan is a separate component and if applicable, provides access to the controls (model dependent). Blackmagic disk speed test download mac. The one-piece frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black. Batteries are not included Please note the price is dependent upon the final configuration. This information is intended for guidance only.
Superior Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements. Heat Input (High) 2.0kW Heat Input (Low) 1.0kW Heat Output (High) 2.0kW Heat Output (Low) 1.0kW Heat Type Fan Heater Control Location High Level - Front - Below Canopy (Manual - Buttons) & Remote Control Manufacturer Guarantee 3 Years Safety Features Thermal Trip Switch Installation Requirement Qualified Electrician Recommended Installation Information All electric fires feature an automatic safety cut-out device. Simply plug into a standard socket. No chimney or flue required. Designed for use in Great Britain and Republic of Ireland only. All fires must be installed in accordance with the manufacturer’s installation and user instructions and current Building Regulations.